Post by account_disabled on Dec 30, 2017 5:40:09 GMT
Hi,Things We Need:
1. A draining Pan
2. 12mm Socket or Ring spanner
3. Oil can(a must needed thing)
4. SAE90 grade Gear oil (just need 120ml of it; pour it to oil can).
Review Of Castrol GL-40 oil:
To Be frank i am not impressed. Comparing to older oil which was in the transmission box its makes the full system more silent but it lack pick up after 65KmpH. Its pretty smother upto 50Kmph( i dont know RPM so am referring with KmpH as reference).
Step 1: Warm up the engine and Put scooter in center stand.
The Bolt in Red circle is the "DRAIN BOLT" and green one is "REFILL BOLT".
Step 2: Loosen the Refill bolt with 12mm Socket' ring spanner.
Note: Keep the Pan below it.
Step 3: then remove the Drain Bolt.
3>> let the oil drain out.
Step 4: Rotate the tire slowly. which will help us to remove the oil completely.
Step 5: Tighten the Drain Bolt.
Note: dont over tight it.
Step 5: Pump the gear Oil into transmission unit using the oil gun.
5>>insert the nozzle fully into it.
Step 6: After pumping the oil in. Let the excess oil flow out.
Note: Dont Over fill the transmission. If so the gasket will get leak.
Step 7: Put the Refill Bolt back. look for any leaks. If there is no leak your ready to role. Enjoy!
For More Details : best advertising videos
1. A draining Pan
2. 12mm Socket or Ring spanner
3. Oil can(a must needed thing)
4. SAE90 grade Gear oil (just need 120ml of it; pour it to oil can).
Review Of Castrol GL-40 oil:
To Be frank i am not impressed. Comparing to older oil which was in the transmission box its makes the full system more silent but it lack pick up after 65KmpH. Its pretty smother upto 50Kmph( i dont know RPM so am referring with KmpH as reference).
Step 1: Warm up the engine and Put scooter in center stand.
The Bolt in Red circle is the "DRAIN BOLT" and green one is "REFILL BOLT".
Step 2: Loosen the Refill bolt with 12mm Socket' ring spanner.
Note: Keep the Pan below it.
Step 3: then remove the Drain Bolt.
3>> let the oil drain out.
Step 4: Rotate the tire slowly. which will help us to remove the oil completely.
Step 5: Tighten the Drain Bolt.
Note: dont over tight it.
Step 5: Pump the gear Oil into transmission unit using the oil gun.
5>>insert the nozzle fully into it.
Step 6: After pumping the oil in. Let the excess oil flow out.
Note: Dont Over fill the transmission. If so the gasket will get leak.
Step 7: Put the Refill Bolt back. look for any leaks. If there is no leak your ready to role. Enjoy!
For More Details : best advertising videos